2CY stainless steel gear pump / pressure pump features: 1,2CY stainless steel gear pump / high pressure pumps are gear, shaft, pump, valve, shaft seal formed. Gear heat treatment with high hardness and strength, and the shaft is installed with operating in replaceable bushings. All parts of the pump are lubricated by the output medium when the pump work automatically achieved. 2, there are well-designed pump drain and return to the tank, gear to withstand the torque force at work in the smallest, so the bearing load is small, small abrasion, high pump efficiency. 3, the pump has a safety valve as overload protection, safety of total reflux exclude pressure pump rated pressure of 1.5 times, but also requires additional adjustment based on the actual discharge pressure range allowed. But note that this safety valve relief valve can not be long-term work, when necessary, be installed in the pipeline. 4, from the extended end of the pump shaft, the clockwise rotation. 5, high flow gear pumps, gear pumps, unloaded pump, pump, pump original, marine gear pumps. 6, flow: 1.1m3 / h-600m3 / h Pressure: 0.28MPa - 2.5MP. 2CY stainless steel gear pump / pressure pump is mainly used for lubrication of various machinery and equipment in the lubricant delivery system for conveying a viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt), the temperature at 300 ℃ less fuel has lubricity. Stainless steel gear pump, can transport without lubrication of oil, beverages, low corrosive liquids. Equipped with copper gear can deliver low interior point liquids such as gasoline, benzene. In addition to the general configuration of this pump motor, it can also be configured in accordance with the specifications of explosion-proof motor users. 2CY stainless steel gear pump / pressure pump Scope: (1) can be used in the oil transfer system, booster; (2) can be used in the fuel system, transmission, compression, fuel injection pump; (30 in all industrial areas, may be used as a lubricating oil pump. 2CY stainless steel gear pump / pressure pump is mainly used for high-volume oil fields, oil depots, ports, docks, ships, etc., unloading!